Discover our solutions for great spaces (Golf, Municipality, Stadium...)
The LR-MS module is a sensor data acquisition module. Available in 2 versions : one input and 4 inputs (allow to accommodate sensors like temperature, soil moisture, anemometer but also water meters and rain sensor). MySOLEM.com platform and App will be able to stop the irrigation with the settings that you will decide (example : tresholds and stop associated modules).
THE 3G / LoRa™ GATEWAY
The LR-BST-25 is a 3G internet connected station, communicating in LoRa™ with more than 25 modules (all irrigation controllers, LR-FL flow meter and LR-MS sensors). Powered by AC or solar panel, the LR-BST-25 is connected to installations at every moment. A battery with 3 days autonomy (with 2 connexions /day) continue the functionning in case of power failure.
LR-IS-fl is the LoRa™ long Range and bluetooth irrigation controller powered by 24 VAC. Thanks to the LoRa™ radio association with LR-MB or LR-BST gateway, the LR-IS-FL is remotely controlled via the MySOLEM applications and platform. The connection on the sensor input of a water meter’s pulse captor allows to monitor overconsumptions, under-consumptions or leakages.
THE BATTERY IRRIGATION
The LR-IP-FL is the Bluetooth ® and LoRa™ long range irrigation controller that associate irrigation function and a water flow control and consumption of your installation. Thanks to the input wired to a pulse contactor of a watermeters, it will be able to monitor and alert in case of a higher flow or lower flow of water on each of its valves outputs and also a leakage out of the irrigation periods. Once associated to a Wi-Fi gateway (LR-MB) or a 3G gateway (LR-BST), the LR-IP-FL can be used remotely with MySOLEM App and plateform.
WI-FI / LoRa™ GATEWAY
(Manage up to 30 irrigation, pool and lighting SOLEM modules)
LR-MB-30 is a Wi-Fi / LoRa™ gateway with the ability to transfer data from the MySOLEM platform via the Wi-Fi box or router into LoRa™ radio signals to the irrigation, lighting or pool modules (up to 30 modules maximum) . Also, it allows to send back the data of sensors coming from the field to MySOLEM platform. Thanks to the large radio range, the irrigation, lighting and pool modules can be installed at severals hundreds meters distances from the LR-MB. Then, You avoid all the wired or range constraints and can connect your entire garden thanks to the LR-MB gateway.
Robustly manufactured wind detector, high mechanical resistance and great flexibility capable of competing or even exceeding in quality the best plastic or metal detectors on the market. Its design allows the introduction of electronic elements inside for additional benefits. The bearings, made of stainless steel, are lubricated with instrumentation oil. The output of the ANEMO4403 V3 is a pulse output proportional to the wind speed given by a reed contact. In this way, the power supply can be reduced to just enough to detect the opening and closing of the contact, thus reducing the consumption of the equipment.The ANEMO4403 is designed in such a way that it can adapt to any system for which it is necessary to know the wind speed, for example with regard to the safety of construction cranes, greenhouses or wind turbines.
EC 5 DECAGON/METER GROUP SENSOR
The EC-5 is a basic, reliable and economical soil moisture sensor. It determines the water content volumetric (VWC) by measuring the dielectric constant of the medium using the technology of capacity. Although the measurement principles are the same as EC-10 and EC-20, the EC-5 differs in design from 2 pins and its higher measurement frequency (70 MHz) allowing it to measure VWC from 0% to 100% (where or generally, the VWC of saturated soils is between 40% and 60% depending on the type of soil). It therefore allows precise measurement of the VWC of all soils and soilless media and a wide range wider salinities. The sensor can be oriented in any direction, however, oriented the flat side of the sensor perpendicular to the ground surface will minimize the effects on downward ground movement.
The rounded shaped rain gauge is compact and has a mounting location for plastic support. It has a very good finish and is equipped with a cable of about 75 cm. After each filling, the bucket empties automatically so that it can be ready to fill again. The bucket fills to about (0.4 mm) and causes a switch to temporarily close. Once wired and added to the LR-MS, the rainfall value can be reported regularly using an LR-MB or LR-BST gateway or irrigation station on the application or the MySOLEM platform.
EC 10 HS DECAGON/METER GROUP SENSOR
The DECAGON EC10 HS humidity sensor is used to measure volumetric humidity content soils and other materials for scientific research and agricultural applications. It therefore measures the volumetric water content via the dielectric constant of the soil using the technology of the capacity. The sensor uses a frequency of 70 MHz which minimizes salinity and texture effects, which which makes it an ideal sensor for standard agricultural and scientific projects. The high resolution allows daily or hourly monitoring of water inputs into the soil.
SMT50 TRUEBNER SENSOR
Designed and manufactured by TRUEBNER, the SMT 50 is a low cost FDR (Frequency Reflectometry) soil moisture sensor. Compact, Functional and Robust: The PCB-based design is economical and the shape of the blade makes installation easy. Housing and cable are watertight. The SMT50 has a wide measuring range. It is maintenance free and frost resistant. With short response times and low salinity disturbance, it is designed for long term observation.